The AKG C214 Condenser Microphone is designed as an inexpensive alternative to other higher-end AKG Microphones. The C214 captures sound combining one side of the legendary C414 dual-capsule system and AKG’s patented Back-Plate Technology which results in an outstanding performance. The AKG C214 is capable of handling the rigors of high sound pressure levels like those you will find when recording guitar amplifiers, while maintaining a sensitivity level perfect for vocals and softer instruments. This microphone boasts a 20 dB Attenuation pad, 13 dB noise floor, and a low cut switch—all in an elegant but rugged package. Besides, the C214 will also work on low phantom power voltages from 12 up to 48 volts. AKG C214 Features AKG’s Legendary 1 inch Edge-Terminated Large Diaphragm Sound Outstanding Dynamic Range (up to 156 dB SPL, Ultra-Low Noise) Roadworthy Design Integrated Suspension to reduce mechanical Noise Switchable 20 dB Attenuation Pad and Low Cut Switch Rugged double mesh Grill for high RF immunity but unaffected Acoustics Gold Plated XLR Output Connector for loss-free signals All-metal Die-cast body with shock and scratch resistant Finish Spider-type Shock Mount included Metal Carrying Case included Designed, Engineered and Built in Vienna, Austria Polar pattern: Cardioid Frequency range: 20 to 20,000 Hz Sensitivity: 20 mV/Pa (-34 dBV) Maximum SPL: 136/156 dB SPL (0/-20 dB) (for 0.5% THD) Equivalent noise level: 13 dB-A to IEC 60268-4 (A-weighted) Signal/noise ratio (A-weighted): 81 dB Preattenuation pad: 0/-20 dB (switchable) Bass cut filter slope: 160 Hz, 6 dB/Octave, switchable Impedance <=200 ohms Recommended load impedance: >=1000 ohms Supply voltage: 12 to 52 V Phantom power to IEC 61938 Current consumption: < 2 mA Dynamic range: 123/143 dB (0/-20 dB) (A-weighted) Connector: IEC standard 3-pin XLR Finish: Matte grayish blue Dimensions: 160 x 55 mm (6.3 x 2.2 inches) Net weight: 280 g (0.62 lbs) Shipping weight: 1450 g (3.22 lbs.) AKG